You must log in or register to comment.
I’m wanting to switch my gaming PC to mint from Windows. I’m new to Linux, that’s why I’m going with mint. What GPU should I buy for my use? (RTX is not important to me. I just need it to play my games well)
If you already have one, just try that, see if it works.
You’ll probably be fine with anything, NVidia’s gotten to work well over the last year or two. If you want to be safe any AMD card should work well.
I’d just buy the best used AMD card in your budget.
I had a ton of trouble getting my R9 390 working on Linux, so ymmv
RX 9070 when it comes out, Mint is good but there are so many good options. I suggest using cachyos and trying out all the DEs so you pick something you like. Although you don’t have to stick with CachyOS if you don’t want to.
Its not just Linux. NVIDIA sucks on windows too, but those PCMR types aren’t willing to admit it.
They’re the ATI drivers of this century.
Ptsd rewakens
It’s really ironic and embarassing. The most valuable chip manufacturer in the world, thanks to advances in AI and AI research, which is usually done using Linux systems. And yet Nvidia still sucks hard when it comes to Linux support.
Nvidia graphics support.
Their money is in headless systems, which TBF are much less problematic with Nvidia. Anything CUDA is first class on Linux with Windows as an afterthought.
1000% on the money here. You want encode, decode, calculation, acceleration? They got it. Rock solid, beautiful and simple. You want that shit to actually SHOW UP ON SCREEN? Get the fuck outta here. What do you think nVidia is, a GRAPHICS CARD company!?
You want that shit to actually SHOW UP ON SCREEN? Get the fuck outta here. What do you think nVidia is, a GRAPHICS CARD company!?
I pray for no blackscreen after every update, and I’m not even using it! It’s hooked up to an AMD IGP!
CUDA always works though, lol.
You also need the damn driver to work for CUDA. Nouveau doesn’t cut it for that.
Anything CUDA is first class on Linux with Windows as an afterthought
Not in my experience.
I wouldn’t call their Windows support stellar, either. There’s only one error code for any and all problems and RTXes can be damn finicky if you’re unlucky.
Latest kernel, wayland, NVIDIA dGPU greater than RTX 900, latest proprietary NVIDIA driver and correct vulkan packages for said driver:
Don’t see any issues, really
What does not work?
Maybe some install steam and choose wrong vulkan dependency 🤔
Or have vulkan dependency for nouveau installed prior to switching to nvidia drivers
I just wonder why pacman not automatically chooses the correct dependency 😅 but I am sure there is a reason
How? I have a 4060ti and it works well enough on wayland
Which distro? You perhaps lucked out so far. Anyone using Linux for multiple years can attest for the trash that are Nvidia drivers, especially once you compare it to AMD (who, outside of professional applications, usually don’t need any driver install or setup at all).
I’m not that person but I impulse switched to Garuda (Arch-based) around 8 months ago with a 3080 and everything has just worked, the only thing I’ve had problems with is flatpak being the bane of my existence
Yeah same, 4070 ti super on garuda, no issues.
Interesting, and good to hear they’ve managed so far. So far my “career” included Ubuntu, Mint, Arch, Debian, Pop!_OS and OpenSuse. At one point or another the Nvidia drivers were a pain on all of them except Pop!, they circumvented most problems most likely due to their approach of maintaining an (almost) dedicated Nvidia build of their distro. Something they can specifically afford given they sell devices with those cards and got people working on this stuff 24/7.
Funnily enough Flatpak works for me like a charm. 😅
Oh, flatpak works great for me, it’s just that it’s too sandboxed and I inevitably need something to talk to something else and rather than learn to use flatseal I just gave up and installed the AUR versions of everything
Yeah, I don’t buy nvidia for this exact reason. No amount of performance matters if the drivers are broken
Yeah, I had to exchange my laptop for another one with an AMD GPU because Wayland was so broken, and I was getting serious input lag in games, even on X11.
And this was a few months ago. NVK worked a bit better, but compatibility wasn’t great, and performance was about 50% of the proprietary driver.
What does not work for you? And which nvidia GPU?
This is why I don’t update Nvidia drivers unless there’s a fix I need. If it’s stable, that’s all I want.
Don’t worry, Nvidia got you covered: it also likes to occasionally break with kernel updates.
Until the GPU cooks itself anyway, because nvidia can’t admit their new power connector was a mistake.
Surely that’s fixed by now, right? SURELY
Seems to be less about the connector, but more about load balancing. The German guy who had 150°C connectors at the PSU side also measured current draws. One cable was doing 22 A (so almost half of the 5090’s total consumption) while the other
7five were just chilling.How about both?
I’d expect the design to take into account this kind of issue, they’re only one of the most valuable companies in the world, surely they can afford some QA.
Nvidia connected all six cables like they were one and have no way to measure or balance the load across all six.
They used to do load balancing on the 30 series, treating it as 3 cables basically (3x2 cables).
Some people “I don’t care why it doesn’t work, it’s Linux’s fault!”
Not just some…
They should just buy a PC build for linux with it preinstalled
Like, tuxedo, system67(or whatever number they have) or I think framework is available like that as well.
Except all those Linux specific privacy/modularbility orientated PCs are expensive as hell with base models starting close to 1k last I checked. They’re aimed at the demographic of cushy tech nerds making bank tapping at a keyboard who care about opsec or right to repair and can comfortably afford dropping 1k on a new laptop without thinking twice about if that money has better uses.
I and many others who don’t live in economic lah-lah land will NEVER be able to justify 1k spent on a laptop just because it has physical kill switches or modular parts and preloaded with a good Linux distro. These companies need to touch grass and come down a couple hundred dollars to the 400-500$ range then we can talk. Until that day comes, the guy selling librebooted thinkpads on eBay running popos or mint is the better option for those who live with the reality of not having a lot of money.
but on the other hand if we tell you to use an used Thinkpad you won’t like that either right ?
Oof bad guess. my daily driver is a used t460 made in 2015 running Mint. I said that used librebooted thinkpads are a great option to inexpensive preinstalled Linux machines. Are you sure you replied to the right person or are your reading comprehension skills fucked? Either way better luck next assumption
Fk me. I just saw an Nvidia package in my apt upgrade. Am I going to be screwed ?
Timeshift time
No, just upgraded from a working computer to an up to date not working computer.
Iktf, I had my 1060-6GB die and for a while I was gaming on a 750Ti lol.
Recently my Crucial 1TB SATA SSD suddenly died, no errors, no SMART, no detection on any computer or via USB adapter, only coil whine, taking with it exactly all the things I never backed up because SSDs are supposed to be good :(
SSDs at the end of their lifespan do tend to fail more gracefully than HDDs, as even when they become fully worn and unable to take new writes, they will often still allow reads.
But, that depends on the specific type of failure.
I had an SSD fail in the same way as yours, where the controller chip or something along the path there died, and it went from fully working to toast in an instant.
Some drives are more reliable, some drives are less reliable, but the only rule is that any drive can break, at any time, old or new.
Always have backups.
Yeah i should know, but I’m too lazy haha. Didn’t lose anything completely irreplaceable but my beautiful bind9 local DNS zone written and annotated by hand is gone.
Plus I have basically nowhere to back up to.
At least the first thing I did when reinstalling Debian was set up an an rsync cron job to fetch the home, etc and some other select dirs, but this is backing up to a Raspberry Pi with a busted micro SD slot that runs off a rather dodgy USB enclosure’d 120 gig mSATA SSD that already failed before that originally transplanted from a busted MSI gaming laptop I sold for coke cash in the mid-2010s.
Not ideal. That pi also periodically shits the bed. It’s exposed to the elements a bit because it’s also in use in 2 DIY iot projects.
Is there a decent non-shit non-megacorp-empowering affordable way of doing off-site backups on a small scale?
Sounds like you’ve got quite the esoteric setup, hehe :)
My personal solution isn’t exactly small as I have two identical four-disk NAS servers which operate with one as primary and the other as a read-only mirror of the primary. For off-site I don’t have an automated solution but just backup onto external every so often and leave it with a family member.
A good solution could be as simple as a raspberry pi with an external SSD at a friend or family’s place, and then make that accessible via VPN to your home network.
