• f4f4f4f4f4f4f4f4
    link
    fedilink
    English
    arrow-up
    11
    ·
    5 months ago

    plugged in US power outlets with reversed pins (so 110 volts now runs through the metal case

    PC power supplies don’t work the way you think they do.

    • I think OC has a case of the Kruger peak…

      ATX power supplies are literally some of the safest power supplies to exist, and a GFCI breaker would prevent this scenario from even happening IMO lol

      • f4f4f4f4f4f4f4f4
        link
        fedilink
        English
        arrow-up
        4
        ·
        5 months ago

        Modern US plugs have a wide blade for “neutral” or “return path” and a narrow blade for “live” or “hot” (plus the round ground pin). In my part of the US, we only have GFCI near water (restrooms and kitchen) but always proper circuit breakers and ground to water pipes where the mains AC enters. There still exist many 2-prong appliances, but those will never have the case connected electrically!

        If you don’t have a proper earth ground, then tying anything together is bad news. You could have one appliance shorting out and damaging others on the same circuit, or burning your wires in the wall. Regarding the PC switch-mode supply, AC in goes to a transformer which doesn’t care if hot and neutral are swapped.

        Sorry if I sounded like a jerk. I’ve been working on PCs and appliances for decades and only once ever had an energized case; not a PC. Touching two machines each plugged into a seperate circuit, got a metallic taste in my mouth, pulled out the meter and measured ~80VAC! Verified my vending machine and outlet were wired correctly and recommended getting their popcorn machine and outlet checked out.