Mines are not outdoor rated, they are just bulb behind (don’t know the word in English) https://duckduckgo.com/?q=applique+extérieure+lumière+&t=fpas&iax=images&ia=images

Here is one outside rated (but should have more available) https://www.bestbuy.com/site/philips-hue-white-welcome-outdoor-floodlight-black/6326654.p?skuId=6326654&intl=nosplash

It is normal behaviour to have them locked to 2.4ghz (just like any other wifi smart things). And it is better that way as 2.4ghz has a longer wifi range than 5ghz.

I have some hue light (ZigBee) for some years and they are rock solid but pricey. That being said, another possibility for your issue could be wifi interference, you could try to analyse and change wifi Channel on your router to see if it gets better.

What papalonian said is right, when this machine came out it was expensive but as today standard, this machine isn’t worth much so don’t spend a lot of money on it. Every plastic part that you see can be printed with your printer. Should be available in their GitHub page. Nonetheless, it’s a great printer to learn 3d printing

Pour les fan de bd, il y a la BD “neuf” qui évoque ce sujet. (Pas d’avis à donner sur la bd car je la commence tout juste)

Comme chez nous avec l’extrême droite, je pense qu’il faut plutôt parler de pourcentage par rapport aux votants que de la population globale. Quoi qu’il en soit, ça fait toujours trop…

Ça rend bien, merci

Thanks

astuce pour bloquer les résultats Ai de Google (bien que je ne l’utilise pas régulièrement, ça peut servir) https://lemmy.world/post/21528873

Nice, that’s remind me that I have also a printer card/page to create

I have forgotten about bubble card, thanks. Started a test with a vertical stack then insert horizontal stack. I’ve tried with mushroom card but might replace those with bubble card

Thanks for sharing

Haven’t read so can’t tell you but you will find info at https://leminal.space/post/11699480

Cura can ignore what’s below buildplate as long as part isn’t too big for X Y axes. For cutting this, I would use 3d builder. Very easy to use. Just open model, and go to modify to cut model

Try following that guide https://community.home-assistant.io/t/installing-home-assistant-os-using-proxmox-8/201835

Can second that email works great to send Epub, never had issues in years

Si jamais, il y a une fonction sur les smartphones pour partager internet via USB (je dis ça car je suppose que tu as pas de carte wifi sur ton pc)

While turning down temperature might help as it will be less fluid, i tend to think that increasing retraction might give him other problems (unless is settings are really low). On pictures we only see stringing at the top where printing areas are very small which means much more retraction are needed. His issue could be related to maximum retraction count and/or minimum extrusion distance, when those numbers are reached, printer will not retract filament to protect grinding too much filament. Others parameters to look out are retraction speed and prime speed but since OP didn’t share settings, no way to tell what he could try.

To OP, please share your printing settings.

I have used darktable, but doesn’t seem to fill your need as it is more a lightroom replacement than Photoshop https://www.darktable.org/

Perfect, thanks

Wondering something, Can you get wireguard client to only be used for HA app and leave everything else threw normal routing on your phone? (Not sure I have proper wording). So that wireguard will always be on but only being used for HA app