Ok, I’ve done a fair bit with wifi devices, now I’m waking up to zigbee.
Got myself an S26 R2 to play with, but just wanted to clarify a few things…
So, if I had a few of these around the house, would they form the man backbone of the zigbee mesh network? Or do they not provide that function?
And also - possibly n00b question - I presume there’s still a need / benefit to flash with esphome? Couldn’t see anything obvious on the site and only searched online for a few mins before giving up and asking for experience rather than random sites…
Zigbee devices are already cloudless local devices, you don’t have to flash them unless there are alternative firmwares that add functionality you desire.
They also need a coordinator to comunicate with HA. You can get a zigbee stick, depending on how you plan on integrating these devices there are some chipsets you should look for. If you want the easy route go for ZHA and maybe the skyconnect stick, otherwise you can go with zigbee2mqtt route which supports more devices and is more customizable and look at their list of recommended coordinators.
Most mains powered zigbee devices act as router and extend the newtork, not all of them do and not all that do are good at it. Some manufacturers use custom implementations of zigbee like Aqara which can cause issues.
I use zigbee2mqtt with a sonoff P stick and I am happy with it, it’s not as plug&play as ZHA, but it’s easy to add support to new devices if they are not already supported.
I have MQTT for some other stuff, so Zigbee2MQTT sounds like the best option… and thanks for suggesting the Sonoff stick… I like their products, so a recommendation is always good - thanks
If you do decide on the sonoff stick make sure you get the P version, not the E version as the later is under experimental support and better for ZHA. You can also have a look at the other zigbee recommended adapters for Zigbee2mqtt: https://www.zigbee2mqtt.io/guide/adapters/
Thanks I was getting confused by the differences between them.
Any ideas on network to zigbee? My HA Pi is far away in the furthest corner of the house, but ethernet is more central to start the mesh off in a better location.
The guide on the official website has a few recommendations for network zigbee coordinators as well: https://www.zigbee2mqtt.io/guide/adapters/ I cannot recommend any as I am using a USB coordinator. But you can also jump on the official Zigbee2Mqtt discord and ask for recommendations there, you can find it linked under support on the website.
I recommend you join that discord as there might be issues that come up and there are a few people on the server that could help you with the troubleshooting.
One thing you have to keep in mind is that you can’t place the zigbee coordinator near other 2.4GHz networks like wifi APs/extenders, bluetooth adapters or microwaves. Well, you can, but you will run into many issues.