Hey everyone, I hope this is ok to post here! I’ve been putting off getting into meshtastic for a while now but the time has come to play around with it. I have done some research but I always like to talk to real people if possible for real world advice and experience, not just youtube salesman and AI top ten lists. I have minimal experience with radio, but some.
As to meshtastic the research I’ve done has pointed me to a few LoRa boards, the heltec t114 v2, and the Lilygo t-beam, and also the Lilygo T-deck plus.
I really would love to have a phoneless standalone set up, but have seen some stuff about the T-deck lacking good firmware and so it isn’t “ready,” but then I’ve seen some people say to the contrary that some good firmware exists now. Are there other better phoneless devices for meshtastic? Is the t-deck good enough now that I could pick that up now and add some t114s later to expand the network? Or should I go with a couple t114s, and wait til phoneless matures a little?
As for the phone using set ups, are there other boards I should look at instead of the t114 and the t-beam? I do require either it to come with a case or have available .stl files to print one, I suck at CAD.
My final questions are to the antennas, is there an antenna manufacturer that is commonly recommended for meshtastics (915 khz), and am I looking for SMA female or SMA male connectors on the antenna, or does that depend on the board in question? I tried searching the product page for the heltec board and SMA isn’t mentioned anywhere according to ctrl+f. I see some kits with an antenna on amazon, but they don’t mention either and I’m sure I’ll want to upgrade the dinky rubber ducky it comes with.
Thanks for taking the time to read this, double thanks if you responded, triple thanks if you have answers or any helpful links! I’m excited to be getting into the hobby here soon, and glad there’s already a lemmy comm for it!
Thanks for showing me the G2 and sensecap indicator, these things look pretty neat! I’ll definitely be looking at those once I’m a bit more into it, for now I’m thinking about a t1000-e and maybe a couple t114 v2s (or maybe a couple t1000-es and one t114 v2, who knows! Lol). I do like how pocket sized the t1000-e is but I worry about the non-upgradable nature (antenna, battery), but then someone here said they hit a repeater with it 4mi away! I’m sure that repeater is up in a tower or something to get that range, but still, hitting it with an internal antenna like that is damn impressive, so it may be fine!
As for the indicator being standalone I’m not sure it’s the one for me in that particular application, I’m basically looking for a blackberry or even nokia 3310 lol, with no SIM/CDMA radio and a LoRa radio instead (and GPS, full functionality of a meshtastic device ykwim), and I can use it to send/read messages directly like texting. A boy can dream!
For their size the T1000-E’s are impressive, I think for many people they are the most practical EDC but folks will often have something else as a base station on their roof.
It would be very cool if someone were to release a mobile phone with LoRa built in.
I ordered one of those and a t114v2 for now. I’ll probably get something else too in time, maybe a base station, maybe just turn the t114 solar and use that, maybe string it up in a huge tree across the way from me on city property where it’s likely to go unnoticed since it’s easily replaceable, who knows!
If you have any ideas of good devices/cases for the outside solar base station I’d love to hear them!