I took a look around and a lot of comments mentioned to get one that uses ‘LiFePO4 Batteries’, and that seemed like a reasonable requirement.

They’re supposed to have a longer life span, be safer, light weight, and better charge/discharge efficiency which is in line with what I’d be looking for.

Some brands/models that I saw recommended:

  • BLUETTI came up in more recent posts
  • Ecoflow (specifically the RIVER 2) came up a lot
  • Anker was suggested a few times, but the comments weren’t that detailed

edit, added an image of what I’m referring to

  • EpicFailGuy@lemmy.world
    link
    fedilink
    English
    arrow-up
    6
    arrow-down
    1
    ·
    18 hours ago

    If price is your main concern make one yourself. Specially if you don’t need 110

    1. buy a 12v battery of your choice (deep cycle are best, but car batteries will do in a pinch, UPS batteries if you want small)

    2. buy a tool box of adequate size for your battery, allow for extra room

    3. order a “float charger”

    4. Order USB and cigarette lighter ports as desired

    5. wire it all up inside the toolbox

    I’ve made a few with minimal effort, they’re great for camping and my latest one even allows me to jump start a car

    There are plenty of guides out there with more detailed steps

    https://www.youtube.com/watch?v=49Do__99Yr4

    I’m currently making one for a friend, let me know if you guys want to see pics of the components

    • lightnsfw@reddthat.com
      link
      fedilink
      English
      arrow-up
      4
      ·
      17 hours ago

      I have very limited experience with this but from what I’ve seen car batteries are terrible for this. They’re not designed to be drained and don’t hold up to it well. Deep cycle is the way to go.

      • EpicFailGuy@lemmy.world
        link
        fedilink
        English
        arrow-up
        4
        ·
        16 hours ago

        This is only applicable if you drain them all the way repeatedly (over draining of the battery leads to sulfate forming on the plates which is)

        https://www.sciencedirect.com/science/article/abs/pii/S0378775303009340

        I combat this by over sizing my batteries. I have a lead one in a tool box I use for camping and I recharge with a solar panel, It’s a standard car battery that for my use lasts 6 hours or so. Normally I use it for a couple hours (between dusk and time to go to bed) to use a laptop, maybe a speaker and an LED light and then I charge it during the day while I go hiking via solar panels.

        If you care for them they can last a long time. There’s also charge controllers you can install to keep it between 20 and 80% charge (for best life) but that’s kind of overkill for my purposes.

        Having said that, yes … deep cycle batteries are a lot better, and even more so are Li Ion and solid state … but they are also significantly more expensive, and I like to use whatever I have at hand.

        • lightnsfw@reddthat.com
          link
          fedilink
          English
          arrow-up
          3
          ·
          15 hours ago

          Thanks for explaining. I think the people I knew who tried this didn’t take any precautions to protect their battery so that would explain why theirs failed so quickly.

      • EpicFailGuy@lemmy.world
        link
        fedilink
        English
        arrow-up
        3
        ·
        18 hours ago

        This one is a very small 3Ah battery because my friend is using it as a proof of concept. He wants it to power a very small Wi-Fi spectrum analyzer / packet capture device when he goes war driving.

        The beauty of Lead acid batteries is that they’re very cheap at the cost of additional weight and volume If I used 18650 Lithium Ion cells I could probably get more than twice the battery capacity, but it gets more expensive and more complex (You have to do some math to figure out how to wire the batteries to add up to 12V and calculate how many amps total so you can fuse it correctly)

        In the pic you can see that there’s already a float charger I’ve taken out of the case to reduce the volume it takes (I normally encase them in epoxy) and an Inverter I’m going to wire externally for him to test 110 with a battery this small

        I still have to cut holes for the USB adapters and float charger port, and I have to shop for a volt meter monitor that fits his needs.