some_guy@lemmy.sdf.org to Technology@lemmy.world · 3 months agoRevised Raspberry Pi 5 chip comes with unexpected power savingsarstechnica.comexternal-linkmessage-square32fedilinkarrow-up1238arrow-down15cross-posted to: raspberrypi@lemmy.mlsbcs@lemux.minnix.devhardware@lemmy.world
arrow-up1233arrow-down1external-linkRevised Raspberry Pi 5 chip comes with unexpected power savingsarstechnica.comsome_guy@lemmy.sdf.org to Technology@lemmy.world · 3 months agomessage-square32fedilinkcross-posted to: raspberrypi@lemmy.mlsbcs@lemux.minnix.devhardware@lemmy.world
minus-squareLinkerbaan@lemmy.worldlinkfedilinkEnglisharrow-up3arrow-down10·edit-23 months agoIt will not. It needs 5a under load. Else there would not be a 5a PSU required.
minus-squarefuckwit_mcbumcrumble@lemmy.dbzer0.comlinkfedilinkEnglisharrow-up6arrow-down1·3 months agohttps://www.raspberrypi.com/documentation/computers/getting-started.html Raspberry Pi 5 5V/5A, 5V/3A limits peripherals to 600mA 5 amp is not a requirement, just a suggestion.
minus-squareLinkerbaan@lemmy.worldlinkfedilinkEnglisharrow-up4arrow-down10·3 months ago5amp is a requirement. It will crash under load without it. I know because I have personally experienced this.
minus-squarefuckwit_mcbumcrumble@lemmy.dbzer0.comlinkfedilinkEnglisharrow-up4arrow-down1·3 months agoSomething is wrong with either your power supply, the cable, or the pi itself. Are you running any hats or any extra hardware? Mine runs just fine on a 3 amp power supply under full load.
minus-squareLinkerbaan@lemmy.worldlinkfedilinkEnglisharrow-up2arrow-down7·3 months agoNothing but the bare pi and heatsink. Some full loads are fuller than others. In my case I tried running some tflite stuff.
It will not. It needs 5a under load. Else there would not be a 5a PSU required.
https://www.raspberrypi.com/documentation/computers/getting-started.html
5 amp is not a requirement, just a suggestion.
5amp is a requirement. It will crash under load without it.
I know because I have personally experienced this.
Something is wrong with either your power supply, the cable, or the pi itself. Are you running any hats or any extra hardware? Mine runs just fine on a 3 amp power supply under full load.
Nothing but the bare pi and heatsink. Some full loads are fuller than others. In my case I tried running some tflite stuff.