I tried just about every suggestion here, but still couldn’t get an airtight print. This is transparent PLA. I’m going to play with my speeds and overlap to try to get it clearer, but it was dimensionally accurate and completely sealed the first try.
Don’t look too carefully at the barrel, it’s just a hollow test one. I was able to eyedropper fill and test the grip section with it, but the OD is wrong, and there’s no real filling mechanism in it. That’s phase 2 of this project!
If you’re looking for watertightness and optical clarity, have you considered looking at Taulman T-glase? One of it’s advertised features is that it has very little thermal shrinkage and can be tuned to be watertight for FDA approved food purposes. It’s PETT not PETG but that’s not too different from PETG IIRC. I’ve personally been looking to get a hold of some for my own 3d printed fountain pen experiments
Also there’s a chance it might be an issue with the sliced model itself, not your filament settings. Cura can do some funky things sometimes with holes
I’m going to try the PLA a bit more, before I go ordering any more clear filament I think. Thanks for the suggestion though! If you end up getting some and it turns out well, maybe you’ll persuade me. What kind of fountain pen things are you trying to print?
I’ve actually been trying to figure out if I could print out an entire pen, sans the nib and feed (and convertor - I want to make something that’s accessible, not something that’ll drive people mad trying to make it fully watertight or that’ll get me sued by TWSBI lol). I’m pretty confident in my TPU skills for gaskets and this is also a project to test out how robust my CAD skills are, because I want to make something that other people can alter. Like want a pen with an unusual grip for accessibility reasons? Or want to make your own knockoff Additive Pens with resin? Or just want to muck around with designs? Go ahead!
…also ngl this is kinda fuelled by how bloody fugly every kit pen I’ve seen is
We have similar goals. I am not so concerned with having it modifiable, I’m working in NX and am not going to be making .prt files available. This pen is for me, and if others like it, so be it.
But making it almost entirely printed is also my goal. I’m using a Jinhao #6 feed, and a Fountain Pen Revolution #6 nib. No saying you couldn’t use a JoWo, or a Jinhao, or a Bock #6 nib, though. I thought about cartridge converters, but thought it might be too difficult to print the connection interface. The Pilot Con-B squeeze converter could be a good option though, I think that has a bigger hole. I’m going with a latex sac because it seemed easiest to me.
I, also, hate pen kits. The all look identical, with their skinny little grip sections and tiny nibs blown out to a huge body. The nibs are always cheap, and the pens are always heavy.
What software are you using?
I’m just using good ol’ fusion 360. I’ve tried learning like openCAD but tbh I’m not the biggest fan of it. I haven’t really thought about the cart connection interface because I’ve been using schmidt nib units (just because I have a few lying around) and the interface is built into the unit itself and like, why reinvent the wheel? I’m more aiming to design a pen body rather than simply make a 3d printed pen just because I can