• @Coreidan@lemmy.world
      link
      fedilink
      English
      1
      edit-2
      2 months ago

      You shouldn’t. Blocking vents is bad for your blower motor as your constricting the system and putting unwanted wear on the blower motor.

      You can do it. But you may end up damaging your hvac system and wearing out some parts much faster then normal.

      • @psud@aussie.zone
        link
        fedilink
        12 months ago

        I have two types of vents:

        • floor vents - to send central heat to all the rooms
        • Ceiling vents - to send inside air outside

        I can’t see any problem with closing one of those types of vent

        • @Coreidan@lemmy.world
          link
          fedilink
          English
          12 months ago

          Again you’re constraining your blower motor by doing so. It’s added wear and tear. It won’t break over night but you will require repairs faster then if you didn’t touch the vents.

          Do want you want. It’s your property. But this is similar to someone constantly leaning on their breaks when they are driving.

          • @psud@aussie.zone
            link
            fedilink
            12 months ago

            I think you misread my comment. I wasn’t talking about closing vents attached to a blower

              • @psud@aussie.zone
                link
                fedilink
                12 months ago

                Vents that they used to put in ceilings in houses in Australia to ensure there was good air exchange between the inside and outside. They vent indoor air to roof space.

                They seem to have come from architects who lived in places without winter